If you’re struggling with wet clothes and your washer’s spin cycle is repeatedly stopping, don’t worry. we can help. Experts of Fy Repair can repair all major appliances like washing machines instantly. Here’s their guide to fixing a washer that won’t spin.

My Washing Machine Is Not Spinning So What Should I Do?

Here are some common reasons for a washer not spinning:

The washing machine is too full.

The load is improperly balanced.

The washer itself isn’t balanced correctly.

The lid switch is broken.

The motor is burnt out.

The belt is broken.

We will analyze each of these issues in detail shortly. First, you should determine if your washing machine is not able to spin at all, or if it stops mid-spin-cycle. To check, listen, and touch the outside of the washer. Or open the lid during the spin cycle (for top-load machines) to see if the drum spins. is in motion. When checking make sure there is no laundry in the machine.

When washers have spin cycle problems, they often don’t even go through the drain cycle. So if your washing machine won’t spin or dry, the same troubleshooting steps should work.

Reasons:- Washer not spinning properly

Here are some reasons, that’s responsible for making the washer not work properly:- 

The Washing Machine is Full than Capacity

When your washing machine fills with water, it may fill but will not spin. Some washers tell you if you’ve put too much water, but many don’t. The machine usually will not detect the problem until the washer fills with water. If that’s the case, unfortunately, your only solution is to remove some wet clothing.

Load is not Balanced Properly

If you’re only trying to wash a few heavy items, your washing machine may not spin or spin effectively. This often happens when you’re washing things like quilts or shoes. Open the machine and move items around to balance the load of the washing machine, and your washer can spin more effectively. Adding more items can also be effective to help balance the load, as long as it does not overfill the machine.

The washer is not Balanced Correctly

You will probably know if your washing machine is not balanced because it will produce a lot of noise and vibration during its spin cycle. An uneven surface can cause problems for all types of washers, as it allows the machine to move while it is running. Some front-loading washers can even sense if they are not properly balanced, and will not spin as a safety precaution – so if you have a front-loading washer that won’t spin, this is one of the first things you should do. What you should do is check. If you find that your washing machine is not well balanced, you can usually adjust the washer’s feet to fix it. Use a level to make sure this is done correctly.

Lid Switch not Working Properly

The lid switch determines whether the lid is properly closed and, as a safety feature, is designed to stop your washer from spinning if not. While most models will not spin the washer at all if the lid switch is not working, some models will allow the washer to fill but not spin.

The Drainage is not Working Well

Normally, your washing machine will not go into the spin cycle until it is dry. The drain pipe may be clogged or clogged with debris from your clothes. If the hose is bent or crushed, it will probably need to be replaced. If it’s jammed, there are some steps you can take to clear it:

• First, unplug the washing machine.
• Then, pull the washer out from the wall to access the hose, which is usually located at the back.
• Disconnect the drain hose at the back (this will be the largest hose in diameter, and will be connected to the drain pipe) – place a bucket nearby to catch water draining out.
• Remove the other end of the hose from the pipe it goes into.
• Now, you can use a wire hanger to insert into the hose and remove whatever is potentially blocking it.
• When done, reconnect the hose to the washer.

The Motor is Damaged

Your washing machine drive motor may burn out, causing the spin cycle to not function properly. If the drive motor is not working, your washing machine may have problems spinning mid-cycle, even if the machine refuels and spins without any trouble. Replacing the drive motor is an advanced repair, so if you suspect this is your problem, it’s best to call a local washing machine repair technician for assistance.

Drive Belt Problems

If the washer drive belt is broken or has fallen off its wheel, the washer may still move and make noise, but the drum will not move around. First, unplug your washing machine, then check the drive belt. Then, remove the back part of the washer to see if the belt is still on the pulley system. If the belt has slipped, you can put it back in place to solve your problem. However, if the belt appears worn or broken, you will need to purchase and install a new one.

The Washer of the Top-loading Washing Machine not working Properly

If you are dealing with a top-loading washer that is not spinning, a bad lid switch is one of the most common causes and you should check it first, especially if your problem is a top-loading washer that fills. It is there and runs but does not rotate properly. You can find the lid switch on the top of your machine, under the lid. Check to see if it makes good contact, or if it is bent. You may be able to bend the switch back into shape, or you may need to replace it. There are several steps, and it is recommended that you use the correct replacement part, so we recommend contacting a washing machine repair professional for help. You can contact Fy Repair Services because they are popular for their fast, timely, cost-effective, and expert washing machine repair service in Bangalore. Washing machines can be quite tricky, so don’t risk harming yourself or your appliance by attempting advanced repairs yourself.

Conclusion

If your washing machine is not spinning, there could be several reasons for this. It may be too full, the load may be unbalanced, or the washer itself may not be balanced correctly. The lid switch may be broken, or there may be a problem with the motor or drive belt. Poor drainage can also cause problems. Regular maintenance and quick repairs keep your washing machine working well. If you are unsure about how to fix the problem, it is best to seek professional help from a reliable repair service like FY Repair Services in Bangalore. They provide fast, affordable, and expert washing machine repair services to ensure that your appliance works like new.