Air conditioners play a critical position in keeping our houses and places of work at the right temperature, in particular at some stage in the summer season. Split air conditioners have turned out to be a not unusual characteristic in each domestic to keep your own home cool at some point in a hot climate. Using the AC for a long time without any renovation can damage your appliance, main to pointless fees.

Periodic protection and cleansing of any air conditioner is vital for clean loose-flowing air, and it also helps expand the lifespan of the unit. Cleaning the interior of a break-up air conditioner can be easy in case you comply with the stairs given under:

Dry the AC

If an air-conditioner is being used, there could be humidity and probable water. Before beginning the cleaning process of your AC, it’s miles important to dry it. Set the air-conditioner to ‘fan mode’ and run it for 30-40 minutes as this will help the moisture evaporate.

Disconnect the Unit from the Power Source

Before you begin cleaning any appliance, it is essential to disconnect the machine from its power source. Before dismantling your AC for cleaning, make sure it has no power supply.

Cover the Unit With a Cleaning Bag

After disconnecting the unit from its electricity source, vicinity a large rubbish bag or an air-con bag across the indoor unit of the AC to catch all the falling dust and dripping dirt.

Detach the Front Panel

Locate the latch or tab holding the front panel of your air-conditioner’s indoor unit, open the latch or push the tab, and carefully lift the panel to access the inside of your unit. If the panel does not come off, hold it with one hand to clean the interior.

Unfasten the Air Filters

Once you detach or lift the front panel of your split air-conditioner, the long rectangular pieces attached to the unit are your air filters. Locate the tabs attaching the air filter to the unit, press them in, and remove the air filter. If you are unable to locate the tab, check the user manual for guidance. Remove dust from the filter with the help of a vacuum cleaner or toothbrush.

Wash the Air Filters

Once you have successfully unscrewed the air filters from the unit and removed their dust, wash them with mild soap and clean cold water to get rid of small dirt particles. Use a sponge or cleaning pad to gently scrub the filter to remove all dust. Wash the filters thoroughly and air dry them completely before reinstalling them. Avoid drying air filters in direct sunlight as most of them are not made for drying in sunlight.

Clean the Bacteria Filters

Once you remove the air filter, some models also have bacteria filters that will require cleaning. You can clean them the same way you wash an air filter. Allow the air filters to dry completely earlier than reinstalling them. You can also use air conditioner cleaners and purifiers to get rid of bacteria and germs from the filter. The cleaner will also eliminate any unpleasant odor coming from the AC.

Clean the Cooling Fins

The cooling fins look like a set of metal lines that fit into the AC and are visible after removing the air filter. Use an air blower to clear dust from the cooling fins. You can attach a box or bag to the air blower so that it can collect all the dust from the fans. Blow carefully without touching the entire metal lines. Cleaning the fans will enhance the cooling process. You can lightly spray air conditioner cleaner on the fans and let them dry so that the next time you turn on your AC, it will fill your room with pleasant fresh air.

Clean the Coils

The coils are round metal pieces that extend across the center of the indoor unit. The fine manner to clean those coils is to apply a no-rinse evaporator spray. You can find them at your neighborhood hardware keep or maybe online. Once you spray the evaporator cleaner on the coils, let it sit and wipe it off after about 20-30 minutes.

Antifungal Spray

An air conditioner antifungal spray helps prevent mildew growth on the internal parts of the unit. Use the spray to clean the coils and fans where toxins are most likely to accumulate. You can also sanitize the air filter of the AC with the help of an antifungal spray. Let the spray sit for about 5 minutes before putting the air filter back into the AC. If you can’t find this spray at your nearest hardware store, you can find it online.

Fix the Air Bacteria

Return the Filter Before you put the air and bacteria filters back into the AC, make sure they are dry. Use a dry cloth to wipe off all moisture immediately. Reinstall both filters inside the AC unit. They should easily return to their position, and if you encounter any difficulties, check the user manual. These filters will give you clean and fresh air the next time you turn on the AC. Cover the filter by fixing the front panel. Install the panel properly and clean it with a dry cloth.

Flush the Drain Lines

Disconnect the pipe separating the indoor and outdoor units. A pressurized flush kit can help unclog AC drain lines. Pressurized flush kits come with a pressurized nozzle that can help clear any blockage in the drain pipe. By applying a force of water or cleaner and with the help of a pressurized nozzle, you can open the drain line of the AC. Make sure to let the drain line air dry for at least an hour before reconnecting the pipe and turning on the AC.

Also Read:- What Is Self-Clean In AC?

Turn on the AC to Clean Itself

Once you have fixed all the parts securely, it is necessary to reconnect the unit to the power source and check whether the AC is running properly or not. Set it to maximum cooling and run the AC for about 15-20 minutes so that all the dirty water released after the unit runs gets flushed out. Keep a cleaning bag or cloth and bucket handy to collect all the dirty water. Once all the dirty water from the AC is drained out, you should experience cool and clean air in the room.

At the End

If you use your home air conditioner extensively, it is important to at least clean the air filter periodically so that it always runs at optimal levels. Additionally, if time permits, you can also clean the coils with a vacuum cleaner without using a no-rinse spray. Cleaning and maintaining your air-conditioner is one of the ways to extend the lifespan of the equipment as well as control your overall home energy consumption. If you are looking to buy a new split air conditioner for your home or office, you can visit our premium retail outlets nearest to you. Apart from this, you can also contact our experts for any help or advice.